Help -
Help for Webmasters
« back to results for ""
Below is a cache of http://www.isemagtech.com/images/magtech/Quoteform.pdf. It's a snapshot of the page taken as our search engine crawled the Web.
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content. ISE-MAGTECH QUOTE REQUEST - LG Series Gage Chamber Details:
Chamber Material Flange Material Conn. Orientation
Process Connection Type: Size Rating
Center to Center/Measuring Length Vent/Drain Type & Size Process Conditions:
Qty: LG Application for (Choose One): Total Level Interface Level Total & Interface
Operating Sp. Gravity: Min. Sp. Gravity: Second Specific Gravity (Interface):
Fluid(s):
Operating Temp Max Temp Operating Press Max Press ISE-MAGTECH QUOTE REQUEST - LG Series Gage Indicator Details:
Follower Red/Silver Flippers Feet & Inches Scale Inches Only 0-100% Metric Special Requirements
Accesssories Required (choose all that apply): Chamber Electric Heat Steam Switches QTY_________ Insulation Tracing Tracing (Pick from list) Transmitter - LTM200DG LTM300G (HART PROTOCOL) LTM300G (Foundation Fieldbus) Area Classification, Ratings or Approvals required: Tel: 281-488-0788 Fax: 281-488-7080 Rep. Firm: Contact: Phone #: Fax #: E-mail: Customer: Contact: Phone #: Fax: E-mail
Additional Notes or Comments:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________ C Inquiry#:____________________By:__________Date:__________
Part No: __________________________________________________ Submit Form Side/Side None
The web site itself may have changed. You can check the current page or check for previous versions at the Internet Archive. Yahoo! is not affiliated with the authors of this page or responsible for its content. ISE-MAGTECH QUOTE REQUEST - LG Series Gage Chamber Details:
Chamber Material Flange Material Conn. Orientation
Process Connection Type: Size Rating
Center to Center/Measuring Length Vent/Drain Type & Size Process Conditions:
Qty: LG Application for (Choose One): Total Level Interface Level Total & Interface
Operating Sp. Gravity: Min. Sp. Gravity: Second Specific Gravity (Interface):
Fluid(s):
Operating Temp Max Temp Operating Press Max Press ISE-MAGTECH QUOTE REQUEST - LG Series Gage Indicator Details:
Follower Red/Silver Flippers Feet & Inches Scale Inches Only 0-100% Metric Special Requirements
Accesssories Required (choose all that apply): Chamber Electric Heat Steam Switches QTY_________ Insulation Tracing Tracing (Pick from list) Transmitter - LTM200DG LTM300G (HART PROTOCOL) LTM300G (Foundation Fieldbus) Area Classification, Ratings or Approvals required: Tel: 281-488-0788 Fax: 281-488-7080 Rep. Firm: Contact: Phone #: Fax #: E-mail: Customer: Contact: Phone #: Fax: E-mail
Additional Notes or Comments:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________ C Inquiry#:____________________By:__________Date:__________
Part No: __________________________________________________ Submit Form Side/Side None
